Cubic boron nitride (cBN), in addition to diamond, is one of the two superabrasives most commonly used for grinding hard materials such as ceramics or difficult-to-cut metal alloys such as nickel-based aeronautical alloys. In the manufacturing process of turbine parts, electroplated cBN wheels are commonly used under creep feed grinding (CFG) conditions for enhancing productivity. This type of wheel is used because of its chemical stability and high thermal conductivity in comparison with diamond, as it maintains its shape longer. However, these wheels only have one abrasive layer, for which wear may lead to vibration and thermal problems. The effect of wear can be partially solved through conditioning the wheel surface. Silicon carbide (SiC) stick conditioning is commonly used in the industry due to its simplicity and good results. Nevertheless, little work has been done on the understanding of this conditioning process for electroplated cBN wheels in terms of wheel topography and later wheel performance during CFG. This work is focused, firstly, on detecting the main wear type and proposing a manner for its measurement and, secondly, on analyzing the effect of the conditioning process in terms of topographical changes and power consumption during grinding before and after conditioning.